-
MIK-DO7011 Membrane dissolved oxygen sensor
MIK-DO7011 Membrane type dissolved oxygen sensor is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. Features Range: DO：0-20 mg/L、0-20 ppm；Temperature：0-45℃Resolution:DO:±3% of the measured value；Temperature：±0.5℃Output signal: 4~20mATemperatureType:NTC 10k/PT1000
-
MIK-PTU8011 Turbidity Sensor
MIK-PTU-8011 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100NTU、0.01－4000NTUResolution:Less than ± 2% of the measured valuePressure range: ≤0.4MPaEnvironment temp: 0~45℃
-
MIK-PH5011 pH sensor
MIK-PH5011 pH sensor increasing the silver ion at the reference sensor part, to enhance the stability and accuracy, suitable for general industrial waste water and discharge solutions.
- Zero potential point: 7±0.25
- Conversion coefficient:≥95%
- Membrane resistance: ＜500Ω
- Practical response time:< 1 min
- Measurement range: 0–14 pH
- Temperature compensation: Pt100/Pt1000/NTC10K
- Temperature: 0~60℃
- Reference: Ag/AgCl
- Pressure resistance: 4 bar at 25 ℃
- Thread Connection: 3/4NPT
- Material: PPS/PC
-
MIK-PH5013A PTFE pH sensor for corrosive medium
MIK-pH-5013A pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Zero potential point:7 ± 0.5 pH
- Conversion coefficient: > 95%
- Installation size: 3/4NPT
- Pressure: 1 ~ 4 Bar at 25 ℃
- Temperature: 0 ~ 60℃ for general cables
-
MIK-ORP6050 ORP sensor
MIK-ORP-6050 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-2000~+2000 mV
- Installation size: 3/4NPT
- Pressure:6 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
-
MIK-TDS7002 4 Electrodes conductivity sensor
MIK-TDS-7002 a variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:10us/cm~500ms/cmResolution:±1%FSTemp compensation:NTC10K (PT1000, PT100, NTC2.252K optional)Temperature range: 0-50℃Temperature accuracy:±3℃
-
MIK-P350K Hygienic pressure transmitter
MIK-P350K is a piezoresistive pressure sensor with compact design and stainless steel body SS304 and SS316L diaphragm , can work in the non-causticity environment, with 4-20mA signal output. Features Range:-0.1~ 0 ~ 40MPaResolution:0.5% F.SOutput signal: 4~20mAInstallation: ClampPower supply:24VDC (12 ~ 36V)
-
MIK-DO7016 Optical dissolved oxygen sensor
MIK-DO7016 Optical Dissolved Oxygen Sensor is based on luminescent optical technology. The Optical Dissolved Oxygen sensor is approved by the ASTM International Method D888-05 Features Range: 0.00 to 20.00 mg/LResolution:0.01Response time: 90% of the value in less than 60 secondsSignal interface: Modbus RS-485 (standard) and SDI-12 (option)Power supply:5 ~ 12 volts
-
MIK-TDS6012 Conductivity sensor
MIK-TDS-6012 A variety of functions in one: conductivity EC / TDS measurement capabilities to achieve two in one, cost-effective integrated design to support the boiler water, RO water treatment, sewage treatment, pharmaceutical industry and other liquid measurement and monitoring. Features Range:0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cm -
MIK-R200D Paperless recorder up to 4 channels unviersal input
MIK-R200D paperless recorder can input signal for all the various needed monitoring records in the industrial site, such as the temperature signal of thermal resistance, and thermocouple, flow signal of the flow meter, pressure signal of the pressure transmitter, etc. Features Inputs channel:Up to 4 channels of universal inputPower supply:176-240VACOutput: alarm output,RS485 outputSampling period: 1sDimensions:160mm*80*110mm
-
MIK-P300G High temperature pressure transmitter
MIK-P300G is a piezoresistive pressure sensor with compact design and stainless steel body SS304 and SS316L diaphragm , can work in the non-causticity environment, with 4-20mA signal output. Features Range:-0.1~ 0 ~ 60MPaResolution:0.5% F.SOutput signal: 4~20mAInstallation: ThreadPower supply:24VDC (9 ~ 36V)
-
MIK-ORP6040 ORP sensor
MIK-ORP-6040 pH sensor used in ORP measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells. Features
- Range:-1000~+1000 mV
- Installation size: 3/4NPT
- Pressure:4 Bar at 25 ℃
- Temperature:0 ~ 60℃ for general cables
